did you check if this really is your IP?
maybe your internet connection just is to slow.
You need quiet a lot of uprate. mrc User 
Offline
Hey Diamond, that is your "LanIP"...
You have to add your "NetIP"...
go to www.myip.com too see your ip! 
Lee Moderator Offline
actually, to forward a port, you have to get the LAN IP, since the router uses that to assign each client (computers) a unique route. To find your IP, go to start>run type in cmd, press enter, type in ipconfig, and find the one title IP Address (note it has to start with 168.192.x.x and can not be 168.192.0.1, 168.192.1.1, 168.192.1.0, 169.192.0.0)
Then use that and follow through with the rest of the procedure
Note: you'll have to change the forwarding once in a while since the lanIP aren't static either. Lee Moderator Offline
@guest: ..., so lame that I'm not even gonna respond to you
@Diamond: Also, useing D-Link won't effect the port forwarding since the receiver is independent of the WAP. Looks lyk you have netgear? Admin/mod comment
then please stand to your word, and don't to it, would you? /Flying Lizard Thanks for your help Lee.
I'll go test it out now.
*EDITED*- Lee, ill send you a PM showing what my cmd looks like, because im lost.
I forgot to mention im using Vista. Will that be a problem?
And yes your correct, im using NETGEAR. edited 1×, last 30.03.08 07:02:15 am
Lee Moderator Offline
It'll be under Ethernet Adapter Local Area Connection and it would likely be the IPV4 address on vista. Ok, i got the IPV4 Address and i have forwarded it.
I also turned my Fire Wall off.
But i still cannot make servers.
Any ideas why i still cannot create? Lee Moderator Offline
hmm, here's how I did mine
go to http://192.168.1.1/FW_forward.htm, the default login should be admin - password.
now create a new custom forward, use whatever service name you want for it, go down to Service type and select TCP, enter 80 for both the starting and the end port, and put 192.168.1.5 in the LanIP
now do the same step as u did above, but this time use UDP and use the ports 36963 and 36963.
After that it should all work. Make sure to periodically check if your lan IP have changed or not. It says "Service name already in use, and cannot be used twice."
Do i need to change the name? Lee Moderator Offline
sure, it doesn't matter what you name it actually, mine are just 2d1 and 2d2 
hanks mate, ill go test it now.
CS2D 
Port Forwarding
1 
